Everything But the Pipe Easy Well Pump Install Kit - Well Seal Version - One and Done

Short on time? In a remote area without access to a hardware store? Get everything you need to install an RPS Water Pump right to your doorstep, thats why we call it the One-and-Done, one click and you're done shopping! 

Step 1) Choose between 100, 200 or 300 foot lengths for your wire, pipe and rope.

Step 2) Determine whether you need the 1" poly pipe (up to 15 GPM) or the 1.25" poly pipe (15-25 GPM). If you need the 200 or 300 foot One and Done length, and want higher GPM, but you're unsure which pipe diameter will work for you - either use a frictional loss calculator or call one of our technicians who will make the calculation for you and recommend a pipe diameter 855-560-5670! 

Step 3) Then choose between a Well Seal Assembly or a Well Cap/Pitless Adapter. Measure your well casing diameter to determine which size Well Seal or Well Cap to select. 

We recommend the 1" One-and-Done kits for pumps from the 05RPS, 07RPS, and 10RPS series. That means the GPM rate is roughly between 5-15GPM. If you're purchasing a pump flow rate higher than 15G GPM, like the 13RPS, 18RPS and 25RPS, you'll need the larger pipe diameter 1.25" One-and-Done.     

The outlet of the 05RPS, 07RPS, 10RPS, 13RPS, 18RPS and 25RPS series are 1.25 inch. For the 1" One and Dones, we've already accounted for the reduction in plumbing size needed to fit to a 1" pipe with the parts included.   

One-and-Done kits include...

Wire

Pump Wire - Outer jacketed (12-3+G AWG for 100 and 200 for kits, 10-3+G AWG for 300 foot kits).  UL Listed per UL 83 Type THW as Deep Well Submersible Pump Cable. Operating temperature range -40° C to 75° C. Annealed bare stranded copper conductors. 

Waterproof Splice Kit for connecting pigtail off pump to rest of pump wire 

Plumbing

Poly Pipe rolls 160psi  (1" IPS) or  250psi(1.25" IPS). Both are NSF 14/61 Rated for Potable Drinking Water MADE IN THE USA 

Check Valve Assembly 1.25" stainless threaded coupler, 1.25" stainless check valve, 1.25"stainless hose barb(for 1.25" poly pipe kits) or 1.25"--> 1" reducing stainless hose barb (for 1" poly pipe kits), and stainless hose clamps.

If you choose the Well Seal Option... 

Well seal assembly (4", 5", 6", 8") with stainless steel well seal, 1.25" stainless threaded nipple, 1.25" stainless threaded tee, 1.25" hose barb (for 1.25" poly pipe kits) or 1.25"--> 1" stainless coupler + 1" stainless hose barb ( for 1" poly pipe kits), and stainless hose clamps for the barbed coupling. 

If you choose the Pitless Adapter option...

Well Cap (4", 5", 6" or 8")

1" stainless steel hose barb and 1" Pitless Adapter Assembly (for 1" poly pipe kits) or 1.25" stainless steel hose barb and 1.25" Pitless Adapter Assembly (for 1.25" poly pipe kits)

Additional Parts

Poly-braid no-rot safety rope, marine grade, submersible rated 3/8" diameter, 2,450lb tensile strength

Teflon tape

Electrical tape

Tools & Equipment you’ll still need on hand for the quick install:

Wire stripper/crimper

Flat and Phillips Screwdriver

Lighter or heatgun for heatshrinks, heating poly pipe for tighter hose clamps

Small socket set as it helps get hose clamps tighter

Simple Multimeter for testing voltages  

***If you are here from our sister company RPS Solar Pumps, this One and Done Kit is made to fit with AC well pumps, and is not interchangeable with the solar pump Turnkey Kit*** 

Info On Well Seals 

Auxiliary hole for wiring

Rubber gasket expands for tight fit

Compatible with 1" to 1-1/4" drop pipe

SEE BELOW FOR HELP WITH SIZING

4" well seal: 1-1/4"* main through hole, 3/4" NPT auxiliary conduit hole, 1/2" NPT vent

5" well seal: 1-1/4"* main through hole, 1" NPT auxiliary conduit hole, 1/2" NPT vent

6" well seal: 1-1/4"* main through hole, 1" NPT auxiliary conduit hole, 1/2" NPT vent

8" well seal: 1-1/4"* main through hole, 1" NPT auxiliary conduit hole, 1/2" NPT vent

*For 1-1/4" plumbing, actual diameter opening 1.70".  Use reducing couplers when using 1in drop pipe.

Note on Varying Well Casing Sizes for Well Seals 

Depending on the material of lining used, varying pipe sizes and the age of the well our engineers have observed that all 6" wells sometimes do not all have the exact same measurements. This holds true for 4", 5" and 8" wells too. A 2-year-old 6" well in Indiana may not have the exact same measurements as a 6" 65-year-old well in Texas. Not to worry! The black gasket around the bottom of RPS stainless steel well seals will swell with exposure to water to help seal off slight inconsistencies in measurements. In rare cases, you can also add some foam tape around the gasket for a more exact fit on wells with "unique" measurements. And as long as the lip of the well seal is sitting over the well casing, you well pump will be safely supported.