1/2 HP / 110V Single Phase / 2 Wire / 3.85" Pump Motor
BONUS $50 Off When You Size with an RPS Pump Tech. Call 855-560-5670 M-F 8AM to 430PM PST
Stainless Steel 110V 1/2 HP motor end, 2 Wire Motor (2 Conductor + Ground).
Also compatible with pump ends from other brands such as Goulds, Grundfos, Franklin Electric and AY MacDonald. Motor spline is manufactured to identical industry standard size, meaning motor is interchangeable with 4" motor ends from other brands, and is compatible with other 4" brand pump ends.
Compatible RPS Pump Ends Include: 05RPS05, 07RPS05, 10RPS05, 25RP05
Our 110V motor option does NOT require an external starter box, as the relay electronics are built into the motor itself.
✅ NSF Drinking Water and UL Compliant
NOTE: This is a motor end ONLY, you will need to already have a pump end or instead purchase one of our RPS motor + pump end kits.
Specs
- Hermetically sealed stator
- Pressure equalizing diaphragm
- Removable wire connector
- Laser welded stainless housing
- 304 Stainless Steel Construction
- Approx 6" pigtail of pump cable
- Length
- Weight
- 3.86" Diameter, made to fit in well casing 4 inches wide and larger
- RPS Water Pumps Spec Sheet + Pump Curves
- RPS Water Pumps Submersible Pump Manual
Shipping, Returns and Warranty
Ultra Fast Shipping
We know how crucial getting water to your property is - that's why we offer FREE SHIPPING with every order over $100, which should arrive to your doorstep within 3-5 business days anywhere in the contiguous USA.
2-Year System Warranty:
Rural Power Systems Inc. (RPS Water Pumps) warrants to the owner for a period of twenty-four (24) months from the date of purchase (“Warranty Period”) such RPS Products will be free from material defects in material and workmanship. During the Warranty Period, RPS Water Pumps will repair or replace any defective part(s) at no cost to the owner. Learn More.
What does our Water Assurance Guarantee mean?
We offer a money back guarantee that our pump systems will provide you water when sized by one of our engineers to your well, desired setup and final total dynamic pumping head. We do require static water levels, drawdown and pressure requirements are accurately estimated during the sizing process, that installation follows the instructions of the RPS User Manual, and that you give RPS engineers a chance to troubleshoot any issues.
Returns
Customer shall inspect the RPS Product within 30 days of receipt and will be deemed to have accepted the RPS Product unless you notify RPS Water Pumps of your intent to return the product. You may return the RPS Products purchased, for any reason, for a full refund up to thirty (30) days after the date of purchase. The RPS Products must be unused, in new condition, and you must pay the return shipping or return to product to RPS Water Pumps in person. For your convenience, we are happy to email printable shipping labels and deduct the cost (often a discounted rate vs. retail store rate) from your refund amount.
After 30 days and up to sixty (60) days after purchase, a full refund is not available, but transferrable store credit is available for returned products. Unfortunately, we do not accept returns past 60 days and are unable to offer refunds, however, your product warranty is transferable in event the system is sold during the Warranty Period.
As a condition of this return policy, you agree to give us the opportunity to troubleshoot the issue(s) with the RPS Product to work out any issues prior to return.
Free Shipping on Orders $100+
Need a Pump ASAP? 2nd Day Air Available
Rather a Friendly Voice? Not Sure on Sizing?
Our famous support team is here to help! Call us at 855-560-5670
